Design manager:
Latest version
Build 1001
- Bug in creating BOM solved
11/3/2004
Build 1002
- Bug in copying symbols/shapes local solved 15/3/2004
Build 1003
- Bug in annotation of the free version solved
7/4/2004
Build 1004
- Annotation over schematic and layout added 2/5/2004
Build 1005
- When annotation over schematic and layout a
netlist should be
made
Bug in copying shapes/symbols local solved 28/5/2004
Build 1006
- Bug solved in reloading sheets with spaces
in the filename
22/7/2004
Build 1007
- License problem solved
2/8/2005
Build 1008
- Bug in backannotation solved.
15/8/2005
Build 1009
- Buttons in the window are made larger.
26/9/2005
Build 1010
- Bug in annotation solved .
3/10/2005
Build 1011
- Bug solved in copying symbols and
geometries local.
19/12/2005
Build 1012
- Longer path/filenames supported.
6/1/2006
Build 1013
- Bug in creating BOM with partnumbers solved 29/1/2007
Geometry editor:
Latest version
Build 1001
- Bug solved when copying objects from one
layer to another
29/3/2004
Build 1002
- Bug solved in saving vertical lines on
top/bottom layer, there were saved as all
angle
lines
2/9/2004
Build 1003
- Bug solved when adding a anti power pad
3/3/2004
Build 1004
Build 1005
Build 1006
- Changes in the dialogs for adding new pins or
creating a new geometry.
Added menu item for changing rules for
making new
pins/geometry
29/7/2004
Build 1007
- Bug solved in loading a
geometry
5/8/2005
Build 1008
- Bug solved in creating DIP and SOIC
geometries
26/9/2005
Build 1009
- Bug solved in showing polygon clearances
18/11/2005
Build 1010
- Message box removed when saving a
geometry with no
errors/warnings.
19/12/2005
Build 1011
- Longer path/filenames supported.
6/1/2006
Build 1012
- Added rename pin.
Added pin visible on/off.
Added save with
errors.
29/11/2006
Build 1013
- Bug solved when saving geometries with
through holes
only
22/1/2007
Schematic editor:
Latest version
Build 1004
- Bug in loading a new symbol solved
17/3/2004
- Bug in drawing rectangles/circles/arcs/texts
with zero line width solved
18/3/2004
Build 1005
- Bug in saving a new symbol solved
7/4/2004
Build 1005
- Bug in creating a new sheet symbol solved
7/6/2004
Build 1007
- Bug in opening a sheet containing instances
with no geometries solved
2/9/2004
Build 1008
- In the 200 pins version of the schematic editor
"Add symbol on shortcut" did not work.
27/11/2004
Build 1009
- In the 200 pins version of the schematic editor
some old symbols showed unwanted
arrowed lines. This bug has been sloved
19/3/2005
Build 1010
- Bug solved in editing the pin numbers in
multiple parts per
package
20/5/2005
Build 1011
- Bug solved in adding multiple pins.
Bug solved in exporting to PDF.
11/7/2005
Build 1012
- Bug solved for text line thickness for adding
pins.
Bug solved in exporting to PDF (circles).
Bug solved in exporting to BMP
(text).
18/7/2005
Build 1013
- Bug solved in changing text into not visible
when double clicking on this text
Added properties in dialogbox when editing
a
symbol
.
22/7/2005
Build 1014
Build 1015
- Bug in displaying pinbusses solved. 26/9/2005
Build 1016
- Bug in checking a schematic solved.
Extra checks for schematics
added.
7/10/2005
Build 1017
- Bug in checking a schematic solved.
(global
connections)
18/11/2005
Build 1018
- Bug solved when placing a wire on an other.
(A junction was not placed)
3/12/2005
Build 1018
- Bug solved when rotating text
9/12/2005
Build 1020
- Longer path/filenames supported.
6/1/2006
Build 1021
- Bug solved in refreshing the screen when
deleting a
wire.
9/12/2005
Build 1022
- Improved updating of the screen when
adding/moving objects
30/3/2005
Build 1023
- Bug solved in modifying symbol properties. 17/5/2005
Build 1024
- Bug solved in printing busconnections to PDF
output
format.
25/5/2005
Build 1025
- Removed "View while design" from the
view
menu.
18/1/2007
Layout editor:
Latest version
Build 1005
- Bug in loading file with rotated text solved 9/3/2004
Build 1006
- Bug in component protection solved
18/3/2004
- Bug is start routing from a smd pad
when top/bottom trace layers
are off
solved
18/3/2004
- Bug in trace colors
solved
18/3/2004
- Start routing from a pad when close
to a trace on an other layer
improved 18/3/2004
- Bug in copying component layer objects
to an other layer
solved
18/3/2004
- DRC during routing
improved
18/3/2004
- Bug in export to DXF layer silkscreen
bottom
soved
18/3/2004
Build 1007
- Bug solved in viewing component values
from components on the bottom layer
29/3/2004
Build 1008
- Bug in updating netlist
solved
7/4/2004
Build 1009
- Bug in removing an areafill with no
net solved
7/6/2004
Build 1010
- Bug in importing DXF file with
mirrored text
14/6/2004
Build 1011
- Bug in displaying error objects solved.
23/6/2004
Build 1012
- Bug in displaying all angle lines from
shapes solved.
Bug solved in the netlist check, the
netlist check went wrong when
checking the connectivity between
a vertical wire and a vertical pin line
of a
geometry
2/9/2004
Build 1013
- Bug in outputing component positions solved.
Bug in moving/rotating component
values
solved.
27/10/2004
Build 1014
- Bug in right mouse menu solved.
Drawing objects on the info layers was
sometimes not possible because the menu
item was grayed out
2/12/2004
Build 1015
- Bug in displaying component refs/values
on top/bottom layer solved.
6/12/2004
Build 1016
- Bug in displaying objects on routing keepout
layers solved.
3/2/2005
Build 1017
- Bug in rebuilding areafills solved
Bug in adding an object with a cutout in an
areafill solved
26/2/2005
Build 1018
- Bug solved in cutting out a circle object from
an areafill
Bug solved in rotating the whole design.
Bug solved when cancelling a print out of
the screen
22/7/2005
Build 1019
- License problem solved
Bug solved when exporting to a DXF file
and modification of the filename
29/7/2005
Build 1020
- Bug solved in protecting components
from the dialog
box
8/8/2005
Build 1021
- Bug solved in protecting components
from the dialog
box.
Generation of areafills has been improved.
Sharp edges will now be removed.
Bug in the design rule check regarding the
board outline has been solved.
Bug in displaying the component outline
on the bottom layer has been
solved. 19/8/2005
Build 1022
- Bug solved in design rule check.
Current active layer is now being displayed
on an area in the left bottom of the window. 27/9/2005
Build 1023
- Component placement mode
added
11/11/2005
Build 1024
- Bug solved in changing net design rules
18/11/2005
Build 1025
- Bug solved in design rule check for texts
29/11/2005
Build 1026
- Longer path/filenames supported.
Board outline routing keepout made visible.
6/1/2006
Build 1027
- Bug solved in rebuilding areafill with
user deletions
11/1/2006
Build 1028
- Bug solved in rebuilding areafill with
user deletions
21/1/2006
Build 1029
- Bug solved in moving a component in
combination with a design rule check
3/5/2006
Build 1030
- Bug solved in plotting non circular arcs
on the
silkscreen.
15/9/2006
Build 1031
- Bug solved in plotting polygons on the
silkscreen.
Bug (arcs) solved in exporting to DXF
29/11/2006
Build 1032
- Bug solved in moving components.
Bug solved in plotting component
references on the bottom silkscreen. 6/12/2006
Build 1033
- Improved "Viewable objects" dialog.
Bug in selecting references solved.
When clicking on the left mouse button,
with no selection rectangle only the first
component will be
selected.
18/1/2007
Build 1034
- Improved routing, when starting from
a pad/via.
Bug solved when editing only references
that are visible.
Cross hair added.
There was a bug when viewing drill files
using the gerber viewer, and the
gerber/drill output format was in mm.
1/2/2007
|